Monday 9 September 2013

Hanayama Cast Cylinder

Update 23 October 2017 - Dear Reader, please check out my new puzzle blog and e-store at http://mechanical-puzzles.com

Name
Cast Cylinder

Designer
Vesa Timonen. A prolific puzzle designer with a number of well known designs including the popular (and wearable) Cast Loop. A number of Vesa's designs have been adopted and manufactured into cast puzzles by Hanayama.

Manufacturer
Hanayama. Launched in August 2013, the Cast Cylinder is currently available in Japanese puzzle shops including Torito but it should hit shops (including online retailers) outside of Japan soon. As of this blog post, the Cast Cylinder is the latest cast puzzle release from Hanayama.

Type & Classification
Take-part; disentanglement

Dimensions
3.6cm (diameter) and 3.5cm (Height)

Materials & Construction
Made of zinc alloy coated with chrome. Quality of construction, finish and fit is very good. Personally I would have preferred the puzzle in a matt finish (like Vesa's early prototypes) rather than the shiny chrome look, but I guess this would have been prohibitively expensive in terms of manufacture.


Overview
I first saw (and played with) the Cast Cylinder at IPP33 in Tokyo. During one of the evenings, Vesa had taken out several Cast Cylinders including his prototypes and spread them on the coffee table in front of us. I had a good fifteen minutes or so with one of the prototypes but got nowhere; maybe too much pressure being around other puzzlers I guess :-). I duly picked up one (together with the Cast G&G and some other puzzles) at the Torito stand during the Puzzle Party on the last day of IPP33.

You can certainly tell why its called the Cast Cylinder. It has got two knurled rings forming an external circular "shell" which surrounds and holds in place three other triangular-shaped pieces. The object is to unlock and separate the pieces.


The two rings can rotate freely in both the same and opposite directions. As you spin them around, now and again, there would be some resistance. At certain points, they can be even pulled slightly apart. I had a vague idea of how the inside pieces are kept in place and so began the usual manipulation of turning, pulling and tugging. Very soon one of the pieces began to "drop" out from the bottom a bit and with some more turning, the second  followed suit. After a bit more fiddling, finally the last piece released itself.

Difficulty Level
Hanayama rates the Cylinder at 4-stars and I think this is about right. Taking the Cylinder apart is tricky but not overly difficult. Putting the thing back together is where the real challenge is. Despite the rather long time I spent with it, I was unable to re-assemble the Cylinder into its original state. I contacted Vesa for help and he was very quick to reply with email instructions (which came "straight from his head", as he puts it) since there is no formal text solution or diagrams (Thanks Vesa!). There is a method to it which takes about six steps to getting the puzzle back together.

Summary
A good looking, well-made (and pocket-able) puzzle that can be solved repeatedly once you grasp the right technique. Practice is needed for this puzzle, otherwise you will be fiddling to no end dropping pieces everywhere. A must-have for any Hanayama Cast Puzzle fan!

UPDATE 24 OCT 2013 - I have received numerous queries from puzzlers, who like me have got stuck trying to reassemble the puzzle. You don't need to get frustrated over this and suffer in silence. Drop me a PM via my Profile email and I will get the re-assembly instructions to you.

16 comments:

  1. Yes Kevin, this is one worth getting. A bit fiddly on the re-assembly but once you get it with some practice, quite easily solvable repeatedly.

    ReplyDelete
  2. I got it at Torito this August, and I could take the Cylinder apart in a couple hours.

    But it's impossible to put the thing back together!!! Can you help me with the solution? ;)
    Thank you!

    Sergio (apofatica@gmail.com)

    ReplyDelete
    Replies
    1. I toolkit apart in about an hour but i can't put it back together please help. Tlwolf16@gmail.com

      Delete
  3. Sergio, I have just emailed you the instructions

    ReplyDelete
  4. Having difficulty reassembling? Can you help?

    ReplyDelete
    Replies
    1. Please let me have your email, thanks

      Delete
    2. Jerry i could use some help myself on reassembling.
      firefighter1526@gmail.com

      Delete
  5. Can you please send me instructions for reassembling the Cast Cylinder? Regards, Tor

    ReplyDelete
  6. I'm a huge fan and collector and this is a remarkable piece. Still I can't bring me to accept the idea that reassembling is difficult especially because you need 3 hands (and little ones) to mange the separate parts. That the same reason why I hate the Equa, it's impossible for me to manipulate. I believe I recall that the first version was even smaller than the common one.

    ReplyDelete
  7. please send me the instructions to put the cast cylinder back together.

    ReplyDelete
    Replies
    1. Could you please PM me with your email so that I can send you the instructions

      Delete
  8. Can you send me instructions to take it apart I’ve gotten close and then mess it up please help me. weareoneteam5@gmail.com

    ReplyDelete
  9. I need instructions to put back together please

    ReplyDelete
  10. Yes, please. Can you email me the instructions to put it back together as well?

    ReplyDelete