Dear Puzzlers
I have added the following new puzzles in limited quantities for sale on my website. Click link below.
1. L(8)tice-2 available in 4 colours (Green, Orange, Black & Clear)
2. Jurassic Pack Ver.2
3. Alpha Pack
Showing posts with label 2D-packing. Show all posts
Showing posts with label 2D-packing. Show all posts
Thursday, 28 June 2018
Friday, 13 April 2018
Currency R&R
Currency R&R, "modded" by Frans De Vreugd for his IPP37 Exchange Puzzle. Nice but very challenging packing puzzle with five different challenges.
The original design, Currency R&S came from Rex Perez and Stanislav Knot.
 |
| This is an example of just one of several solutions for one of the three anti slide challenges |
Monday, 9 April 2018
Gridlock at the Arc De Triomphe
Anti slide puzzle designed by Brian Young, Junichi Yananose and William Hu. Difficult and I still have not found the solution to it...
http://mechanical-puzzles.com/anti-slide-puzzle/
http://mechanical-puzzles.com/anti-slide-puzzle/
Saturday, 24 February 2018
Yet Another Clover Puzzle & Chorazin
Two new puzzle reviews posted.
Yet Another Clover Puzzle by Rik Van Grol
http://mechanical-puzzles.com/yet-another-clover-puzzle/
Chorazin by Yael Meron
http://mechanical-puzzles.com/chorazin-puzzle-inspired-synagogue/
Yet Another Clover Puzzle by Rik Van Grol
http://mechanical-puzzles.com/yet-another-clover-puzzle/
Chorazin by Yael Meron
http://mechanical-puzzles.com/chorazin-puzzle-inspired-synagogue/
Wednesday, 15 November 2017
Saturday, 20 May 2017
Checking In
Steward Coffin's designs are typically not known to be easy and my puzzle of choice this weekend was no different.In fact it is probably one of the harder ones I have played with, considering the amount of time it took me to solve. This puzzle was Jerry Slocum's IPP34 Exchange Puzzle called "Checking In" and its Coffin's design #223.
Checking In was made by Brian Young of Mr Puzzle and comprises of Western Australian Jarrah for the tray and a combo of Jarrah and Queensland Silver Ash for the eight pieces. The puzzle measures about 10cm x 10cm x 1.5cm. According to Brian, this design has never been made before so its the first time design #223 has been produced. As usual, quality and construction is very good and the pieces with its two-tone colours looks fabulous.
The puzzle comes "semi-solved" and the goal is to fit one of the pieces packaged at the bottom of the frame flat into the tray together with the rest of the other seven pieces. Not only that but to also form a checkerboard pattern as well. Each of the eight pieces consist of dark and light squares and half squares (triangles) glued together. One look and it is obvious right from beginning that this one wasn't going to be easy. The pieces don't look like they can all fit into the tray. And the fact that its eight pieces already ups the the difficulty quotient by a few notches.
I spent around two hours or so over several sessions trying to figure this one out. At first, random sort of packing, but usually this won't work when there are a large number of pieces. Then I tried logical deduction/reasoning, which I would say helps to some extent for this puzzle. Many a times, it was always the last one or two pieces that couldn't fit. But eventually the a-ha moment came when I adjusted the last few pieces and the tray accepted the last piece nicely...and in a checker board pattern too! A rather "interesting" solution I might add!
Not at all easy but not unduly frustrating either...although I would imagine that those who don't often play with packing puzzles could spend hours on Checking In and get no where. Mr Puzzle rates it a 6/10 for difficulty but I think it deserves a 6.5 or 7. If you are into packing puzzles (and given this is a Coffin design which is not easily available), Checking In should be on your must-have list. Available only from Mr Puzzle at a price of A$50/-
For anyone who might want to take a look at the solution, please PM me via my blog email here.
Checking In was made by Brian Young of Mr Puzzle and comprises of Western Australian Jarrah for the tray and a combo of Jarrah and Queensland Silver Ash for the eight pieces. The puzzle measures about 10cm x 10cm x 1.5cm. According to Brian, this design has never been made before so its the first time design #223 has been produced. As usual, quality and construction is very good and the pieces with its two-tone colours looks fabulous.
The puzzle comes "semi-solved" and the goal is to fit one of the pieces packaged at the bottom of the frame flat into the tray together with the rest of the other seven pieces. Not only that but to also form a checkerboard pattern as well. Each of the eight pieces consist of dark and light squares and half squares (triangles) glued together. One look and it is obvious right from beginning that this one wasn't going to be easy. The pieces don't look like they can all fit into the tray. And the fact that its eight pieces already ups the the difficulty quotient by a few notches.
I spent around two hours or so over several sessions trying to figure this one out. At first, random sort of packing, but usually this won't work when there are a large number of pieces. Then I tried logical deduction/reasoning, which I would say helps to some extent for this puzzle. Many a times, it was always the last one or two pieces that couldn't fit. But eventually the a-ha moment came when I adjusted the last few pieces and the tray accepted the last piece nicely...and in a checker board pattern too! A rather "interesting" solution I might add!
Not at all easy but not unduly frustrating either...although I would imagine that those who don't often play with packing puzzles could spend hours on Checking In and get no where. Mr Puzzle rates it a 6/10 for difficulty but I think it deserves a 6.5 or 7. If you are into packing puzzles (and given this is a Coffin design which is not easily available), Checking In should be on your must-have list. Available only from Mr Puzzle at a price of A$50/-
For anyone who might want to take a look at the solution, please PM me via my blog email here.
Wednesday, 3 May 2017
The 3/4 Pack Puzzle
I have had several Dick Hess puzzles in my collection for some time now and he has designed and produced quite a number including both packing, sliding block and entanglement ones. I thought I would start off with something of his that is more manageable and the 3/4 Pack Puzzle fits the bill just right.
The 3/4 Pack Puzzle was Dick's IPP36 exchange puzzle in Kyoto last year. Its a 2D tray packing puzzle with six 3/4 discs. Manufactured by Walt Hoppe, it is made from laser cut Cherry wood and measures about 12.7cm x 9cm x 0.9cm. The tray and pieces are precision cut with tight tolerances. It even has a slot for one of discs for ease of storage when not in play
Typically for puzzles like this, where the fit is just right, I would place it in a dry box to make sure there is no expansion of the pieces due to the high humidity, which is what I did. One never knows if the inability to solve could have been due to expanded pieces which can't fit where it should.
The object is to place all six 3/4 discs flat into the square cavity. The puzzle comes with the solution sheet which shows that there are actually 8 ways to pack the pieces in. This explains why I didn't have too much trouble with this packing puzzle! But of the 8 ways (plus flipped pieces), only two are optimum (best) solutions and the rest go in descending order thereafter from 2nd, 3rd, 4th and 5th best solutions. I am proud to say my first attempt was actually one of the two "best" solutions!
The 3/4 Pack Puzzle is not too difficult and this is one of those packing puzzles that you can lay out all the pieces in the tray and slowly manipulate the pieces bit by bit to ensure every piece will fit inside. However, aside from the challenge perspective, I guess what's significant is also the math behind the design and the very precise manufacture of each and every copy to ensure that the puzzle works properly as intended. For those keen on the 3/4 Pack Puzzle or other Dick Hess puzzles, please PM me via my blog site email.
The 3/4 Pack Puzzle was Dick's IPP36 exchange puzzle in Kyoto last year. Its a 2D tray packing puzzle with six 3/4 discs. Manufactured by Walt Hoppe, it is made from laser cut Cherry wood and measures about 12.7cm x 9cm x 0.9cm. The tray and pieces are precision cut with tight tolerances. It even has a slot for one of discs for ease of storage when not in play
Typically for puzzles like this, where the fit is just right, I would place it in a dry box to make sure there is no expansion of the pieces due to the high humidity, which is what I did. One never knows if the inability to solve could have been due to expanded pieces which can't fit where it should.
The object is to place all six 3/4 discs flat into the square cavity. The puzzle comes with the solution sheet which shows that there are actually 8 ways to pack the pieces in. This explains why I didn't have too much trouble with this packing puzzle! But of the 8 ways (plus flipped pieces), only two are optimum (best) solutions and the rest go in descending order thereafter from 2nd, 3rd, 4th and 5th best solutions. I am proud to say my first attempt was actually one of the two "best" solutions!
The 3/4 Pack Puzzle is not too difficult and this is one of those packing puzzles that you can lay out all the pieces in the tray and slowly manipulate the pieces bit by bit to ensure every piece will fit inside. However, aside from the challenge perspective, I guess what's significant is also the math behind the design and the very precise manufacture of each and every copy to ensure that the puzzle works properly as intended. For those keen on the 3/4 Pack Puzzle or other Dick Hess puzzles, please PM me via my blog site email.
Wednesday, 15 February 2017
ZooLogical Garden #1
Here's a 2D packing puzzle that has occupied me for the last couple of evenings. The ZG#1 looks like your typical packing puzzle but comes with a twist...literally! Designed by Mineyuki Uyematsu (MINE) in 2013, it has a 3-unit piece anchored to the tray. This is a restraining piece that adds to the difficulty of the puzzle, even tho' it is able to rotate 360 degrees.
The four loose pieces look pretty "simple" enough and are precision laser cut to resemble the shape of "animals", hence the name of the puzzle. Don't know about you, but I can (see) a chicken, snake, skunk and coyote! The tray is a regular 7x7 grid square.
There are two challenges here:-
#1 - Place all the three white pieces into the tray
#2 - Place any two pieces AND the red piece into the tray. (Problem-it doesn't say which two to use)
Simple looking but the puzzling is anything but simple. In fact it is damn challenging especially #2.
I didn't have too much problem with challenge #1 for this puzzle, partly because I design some 2D puzzles myself and have played with a number of them, and some with rather odd solutions (hint). However challenge #2 eluded me all the while. It is very difficult because you need to first find the two correct white pieces and then combine them with the red piece. (my interpretation of challenge #2). Despite my many attempts at trying the (three) possible combinations to figure out which of the two white pieces to use, nothing worked. I could have been using the right white pieces all the while (and didn't know it) but still couldn't manage to solve the puzzle.
With the aid of Burr Tools (thank goodness it works for this puzzle), I was able to narrow down the two required pieces and from there arrived at the solution; something which I have no hesitation to admit that I wouldn't have been able to do on my own.
For packing puzzle lovers, definitely a must-get (unfortunately from what I can tell, its not available on MINE's site at the moment). When I bought it from MINE during the IPP in 2013, I remembered it was not expensive at all. So I would say its good value for money with plenty of puzzling; two challenges - the first easier (but probably will be hard for many, except seasoned packing puzzlers) and the second a real toughie!
The four loose pieces look pretty "simple" enough and are precision laser cut to resemble the shape of "animals", hence the name of the puzzle. Don't know about you, but I can (see) a chicken, snake, skunk and coyote! The tray is a regular 7x7 grid square.
There are two challenges here:-
#1 - Place all the three white pieces into the tray
#2 - Place any two pieces AND the red piece into the tray. (Problem-it doesn't say which two to use)
Simple looking but the puzzling is anything but simple. In fact it is damn challenging especially #2.
I didn't have too much problem with challenge #1 for this puzzle, partly because I design some 2D puzzles myself and have played with a number of them, and some with rather odd solutions (hint). However challenge #2 eluded me all the while. It is very difficult because you need to first find the two correct white pieces and then combine them with the red piece. (my interpretation of challenge #2). Despite my many attempts at trying the (three) possible combinations to figure out which of the two white pieces to use, nothing worked. I could have been using the right white pieces all the while (and didn't know it) but still couldn't manage to solve the puzzle.
With the aid of Burr Tools (thank goodness it works for this puzzle), I was able to narrow down the two required pieces and from there arrived at the solution; something which I have no hesitation to admit that I wouldn't have been able to do on my own.
For packing puzzle lovers, definitely a must-get (unfortunately from what I can tell, its not available on MINE's site at the moment). When I bought it from MINE during the IPP in 2013, I remembered it was not expensive at all. So I would say its good value for money with plenty of puzzling; two challenges - the first easier (but probably will be hard for many, except seasoned packing puzzlers) and the second a real toughie!
Saturday, 19 November 2016
Seal
This weekend, I played (or rather re-played) a puzzle that has seen a number of incarnations over the years. The puzzle is Naoaki Takashima's IPP36 Exchange Puzzle called Seal - Slide-Blocked Sliding Block Puzzle.
The original version of the SBSB with a garage and car theme was designed by Bill Cutler in 1987. Bill made a later version using the "seal and ball" theme and entered it in the 1988 Hikimi Wooden Puzzle Design Competition where he won the Grand Prize. Subsequently Tom Lensch also made versions of the original SBSB and his latest version is featured in one of my previous post, suing a "twin arrows" theme.
Naoaki Takashima is a Japanese Puzzle collector who reputedly has the largest private collection of mechanical puzzles outside the USA/Europe and in Japan. His version of the SBSB for the Exchange is different from the original Bill Cutler and Tom Lensch versions in several respects:-
1. The design is an "upside down" version of the original.
2. The pieces are made of laser cut double layer glued acrylic and removable from the tray. You can't see it from the photos but there is a groove running along the inside bottom edge of the tray with two of the pieces having "notches". The Tom Lensch version is interlocking and pieces can't be removed. This feature is a God-send and very necessary if you are stuck halfway and want to reset it to the start position. Tom's version is not so easy.
3. Handy size of 11cm x 9cm for ease of carrying around.
Like the previous versions, the Seal takes a minimum of 41 rectilinear moves to solve. The main notable feature is that the piece with the red ball restricts the movements of the other pieces depending on where the piece is at the moment, which have been described in my review of Tom Lensch's version of the SBSB.
Although I have played with the SBSB nearly two years ago, it still took me a while to figure out the moves again with the Seal and several times I had to re-arrange the pieces and start from beginning.
Perhaps the best part about this puzzle is that all the action (min. 41 moves or more) takes place within a simple looking 3 x 2 size grid, and involving five rectangular pieces only, moving one at a time left right up and down...incredible design feat here!
As far as I know, all the other versions of the SBSB are not currently available but perhaps Naoaki, like most puzzle exchangers, may have some copies still left over from IPP36 for sale.
 |
| Start Position |
 |
| End Position |
Naoaki Takashima is a Japanese Puzzle collector who reputedly has the largest private collection of mechanical puzzles outside the USA/Europe and in Japan. His version of the SBSB for the Exchange is different from the original Bill Cutler and Tom Lensch versions in several respects:-
1. The design is an "upside down" version of the original.
2. The pieces are made of laser cut double layer glued acrylic and removable from the tray. You can't see it from the photos but there is a groove running along the inside bottom edge of the tray with two of the pieces having "notches". The Tom Lensch version is interlocking and pieces can't be removed. This feature is a God-send and very necessary if you are stuck halfway and want to reset it to the start position. Tom's version is not so easy.
3. Handy size of 11cm x 9cm for ease of carrying around.
 |
| SBSB made by Tom Lensch. The pieces are un-removable, except for the holding piece |
Although I have played with the SBSB nearly two years ago, it still took me a while to figure out the moves again with the Seal and several times I had to re-arrange the pieces and start from beginning.
Perhaps the best part about this puzzle is that all the action (min. 41 moves or more) takes place within a simple looking 3 x 2 size grid, and involving five rectangular pieces only, moving one at a time left right up and down...incredible design feat here!
As far as I know, all the other versions of the SBSB are not currently available but perhaps Naoaki, like most puzzle exchangers, may have some copies still left over from IPP36 for sale.
Sunday, 6 November 2016
2016 8 August
There are packing puzzles and there are packing puzzles. And 2D packing puzzles come in all shapes and styles. Aside from the typical standard "fit X number of pieces" into the tray version, there are those which require the puzzler to find a symmetrical shape, an anti-slide formation or in the case of the "2016 8 August" puzzle here, leave a certain designated portion of the tray uncovered.
"8 August" is not just a packing puzzle, but it also bears a theme...it is a calendar packing puzzle, but more on that later...
This puzzle is Rikishi (Lixy) Ramada's IPP36 Exchange Puzzle. It is made from precision laser cut acrylic for both the tray and pieces and fits nicely into a standard CD case as part of the packaging. The details, text, numerals etc and instructions are beautifully etched onto the top and inside surfaces of the tray. A very high quality piece indeed.
The object of the puzzle is to cover up the tray with all the 6 given pieces but leaving a single date open. Since there are 31 days in August, there are 31 challenges here. What is interesting is also that each of the 6 pieces is a pentomino (ie shape made up of 5 square units) selected from the total of 12 possible flat pentomino configurations.
The design and shape of the tray provides 155 ways to pack the 6 pieces into the box, but for each date to be left uncovered, this will vary from date to date. The easiest challenge is the date 26th August, which has 22 solutions while 7 dates in the calendar have a unique solution. And of course the rest of the dates in between have varying number of solutions (see photo). Quite amazing how Lixy managed to find a combination of 6 pentomino pieces which can reveal any one of the 31 dates in the tray! Lixy had probably also chosen the month of August for his puzzle to coincide with IPP36 which officially ran from 5th to 7th August 2016.
I tried 26th August and it was pretty easy (given there are 22 possibilities) and next I tried my own birthday (9th August). 9th August has 5 solutions and this took me a bit longer to find. When it came to the dates with only 1 solution, well, you can guess....
8 August is not only interesting and fun as a packing puzzle (with not too many pieces), but there are varying levels of challenges inherently built in which can test the novice and the expert alike and anyone else in between. And If you ignore the year and the days and just focused on the dates, this puzzle can actually be turned into a perpetual calendar.
This puzzle is Rikishi (Lixy) Ramada's IPP36 Exchange Puzzle. It is made from precision laser cut acrylic for both the tray and pieces and fits nicely into a standard CD case as part of the packaging. The details, text, numerals etc and instructions are beautifully etched onto the top and inside surfaces of the tray. A very high quality piece indeed.
The object of the puzzle is to cover up the tray with all the 6 given pieces but leaving a single date open. Since there are 31 days in August, there are 31 challenges here. What is interesting is also that each of the 6 pieces is a pentomino (ie shape made up of 5 square units) selected from the total of 12 possible flat pentomino configurations.
The design and shape of the tray provides 155 ways to pack the 6 pieces into the box, but for each date to be left uncovered, this will vary from date to date. The easiest challenge is the date 26th August, which has 22 solutions while 7 dates in the calendar have a unique solution. And of course the rest of the dates in between have varying number of solutions (see photo). Quite amazing how Lixy managed to find a combination of 6 pentomino pieces which can reveal any one of the 31 dates in the tray! Lixy had probably also chosen the month of August for his puzzle to coincide with IPP36 which officially ran from 5th to 7th August 2016.
I tried 26th August and it was pretty easy (given there are 22 possibilities) and next I tried my own birthday (9th August). 9th August has 5 solutions and this took me a bit longer to find. When it came to the dates with only 1 solution, well, you can guess....
8 August is not only interesting and fun as a packing puzzle (with not too many pieces), but there are varying levels of challenges inherently built in which can test the novice and the expert alike and anyone else in between. And If you ignore the year and the days and just focused on the dates, this puzzle can actually be turned into a perpetual calendar.
Wednesday, 28 September 2016
CheckerBored 3
CheckerBored 3 is anything but boring!
I had thought that with the fair amount of practice I have had with packing puzzles designed by Goh Pit Khiam such as Dancing Shoes, Almost There, Fusion etc and Stewart Coffin's CCC-1, Cruiser and Five-FIt, I would have been able to solve William Waite's IPP36 Exchange Puzzle the CheckerBored 3. But this was not to be the case, sadly.
Waite runs a website called Puzzlemist selling some very beautiful (and very difficult looking) 2D packing puzzles based on various themes, all which have been designed and produced him.
Waite's CheckerBored 3 consists of a regular square tray(10cm x 10cm) and six 6 other pieces. The pieces look as if they have been dissected from a regular 8x8 checker board into different shapes and 5 of the pieces consists of diagonal half squares as well.
The entire puzzle has been precision laser cut with the darker squares laser etched in a grid pattern. Quality fit and finish is very good and each puzzle comes in a sponge lined box for protection.
The object is to place all the 6 pieces into the tray to make a checker board pattern and with half squares permitted.
The typical starting point would be to try placing all 6 pieces inside the tray and adjusting the pieces randomly to find a fit. But of course this would have been too easy and yielded no success. Somehow one piece just "didn't gel in with the others". I think I must have spent several hours over the course of a few days of puzzling but got no where; to the point I actually wondered if I had been given a wrong piece(s). Finally I threw in the towel and shot Waite an email asking for the solution. Waite replied to say he was traveling and had no access to the solution until the following week. But he did give me a couple of hints.
Using his hints....yes, it is possible to lay out the 6 given pieces in the tray in a checker board pattern as intended and it looks amazing...now why didn't I try that??
Nothing more needs to be said. A very challenging puzzle IMHO and die hard packing fans (Dave Holt, if you are reading this) won't be disappointed. You won't find CheckerBored 3 on his site but you can try contacting Waite directly (via his site contact) for availability.
I had thought that with the fair amount of practice I have had with packing puzzles designed by Goh Pit Khiam such as Dancing Shoes, Almost There, Fusion etc and Stewart Coffin's CCC-1, Cruiser and Five-FIt, I would have been able to solve William Waite's IPP36 Exchange Puzzle the CheckerBored 3. But this was not to be the case, sadly.
Waite's CheckerBored 3 consists of a regular square tray(10cm x 10cm) and six 6 other pieces. The pieces look as if they have been dissected from a regular 8x8 checker board into different shapes and 5 of the pieces consists of diagonal half squares as well.
The entire puzzle has been precision laser cut with the darker squares laser etched in a grid pattern. Quality fit and finish is very good and each puzzle comes in a sponge lined box for protection.
The object is to place all the 6 pieces into the tray to make a checker board pattern and with half squares permitted.
The typical starting point would be to try placing all 6 pieces inside the tray and adjusting the pieces randomly to find a fit. But of course this would have been too easy and yielded no success. Somehow one piece just "didn't gel in with the others". I think I must have spent several hours over the course of a few days of puzzling but got no where; to the point I actually wondered if I had been given a wrong piece(s). Finally I threw in the towel and shot Waite an email asking for the solution. Waite replied to say he was traveling and had no access to the solution until the following week. But he did give me a couple of hints.
Using his hints....yes, it is possible to lay out the 6 given pieces in the tray in a checker board pattern as intended and it looks amazing...now why didn't I try that??
Nothing more needs to be said. A very challenging puzzle IMHO and die hard packing fans (Dave Holt, if you are reading this) won't be disappointed. You won't find CheckerBored 3 on his site but you can try contacting Waite directly (via his site contact) for availability.
Sunday, 10 July 2016
Square Dissection
I don't normally spend too much time on a single puzzle, because I have many puzzles in my collection (a lot of them Exchange Puzzles) that I have yet to go through. From my last count from two exchanges, I have still over 140 more which are untouched. I know there are those who persist with a single puzzle for weeks at an end, eg Kevin Sadler and I truly respect their efforts! But I am not one of them.
But Square Dissection got more than my usual fair share of attention because firstly I quite like packing puzzles and secondly, I also enjoy designing them and producing working copies in plexiglass for myself or for sale. So when I selected Nick Baxter's Square Dissection from my stash, which was his IPP34 Exchange Puzzle, and thinking to myself that its JUST 9 ordinary rectangles into a tray, I decided to test my solving powers on his design....and failed quite miserably!
First the specs...the tray measures 9.5cm x 9.5cm x 0.6cm. The pieces are all rectangles with differing measurements for each like 18x20, 24x25 etc. These are not actual measurements but unit values of the length x width of the pieces. Both tray and pieces are made of translucent red and green acrylic/plexiglass. Everything is laser cut to perfection...and tight tolerances are indeed needed for this puzzle!
The goal is to place all the 9 green rectangles into the tray with none of the pieces sticking out. Your regular 2D tray packing puzzle right? Yes, but nothing regular about it. In fact after trying for several days on and off and not getting anywhere (there is always just one last piece that refuses to go in), I did what I usually advocate; that is to ask the designer for help. Nick came back with a series of questions which were actually hints on the solve. Needless to say, these hints were lost on me and another round of email exchanges resulted in yet more hints. Still no luck and a couple of weeks later, I threw in the towel and asked for the solution. Damn...everything fits so easily and nicely into the tray! Actually there is a bit more to this puzzle that meets the eye but I shan't mention anything more here as I don't want to have any spoilers for those who may still be tearing their hair out over the Square Dissection.
This puzzle may look innocuously ordinary, but there is a lot of "mathematics" behind the design and IMHO, very difficult and challenging. According to Nick, there are 23,224,320 ways to lay the pieces in a 3x3 format but only one will enable the correct fit inside the tray. And before I forget, don't waste your time with Burr Tools, it won't work.
For hardcore packing fans, this is a must have! Dave Holt, hope you are reading this. Go for one!
But Square Dissection got more than my usual fair share of attention because firstly I quite like packing puzzles and secondly, I also enjoy designing them and producing working copies in plexiglass for myself or for sale. So when I selected Nick Baxter's Square Dissection from my stash, which was his IPP34 Exchange Puzzle, and thinking to myself that its JUST 9 ordinary rectangles into a tray, I decided to test my solving powers on his design....and failed quite miserably!
First the specs...the tray measures 9.5cm x 9.5cm x 0.6cm. The pieces are all rectangles with differing measurements for each like 18x20, 24x25 etc. These are not actual measurements but unit values of the length x width of the pieces. Both tray and pieces are made of translucent red and green acrylic/plexiglass. Everything is laser cut to perfection...and tight tolerances are indeed needed for this puzzle!
The goal is to place all the 9 green rectangles into the tray with none of the pieces sticking out. Your regular 2D tray packing puzzle right? Yes, but nothing regular about it. In fact after trying for several days on and off and not getting anywhere (there is always just one last piece that refuses to go in), I did what I usually advocate; that is to ask the designer for help. Nick came back with a series of questions which were actually hints on the solve. Needless to say, these hints were lost on me and another round of email exchanges resulted in yet more hints. Still no luck and a couple of weeks later, I threw in the towel and asked for the solution. Damn...everything fits so easily and nicely into the tray! Actually there is a bit more to this puzzle that meets the eye but I shan't mention anything more here as I don't want to have any spoilers for those who may still be tearing their hair out over the Square Dissection.
This puzzle may look innocuously ordinary, but there is a lot of "mathematics" behind the design and IMHO, very difficult and challenging. According to Nick, there are 23,224,320 ways to lay the pieces in a 3x3 format but only one will enable the correct fit inside the tray. And before I forget, don't waste your time with Burr Tools, it won't work.
For hardcore packing fans, this is a must have! Dave Holt, hope you are reading this. Go for one!
Sunday, 3 July 2016
DP3
DP3 stands for Daisy Petal Puzzle Pin. It not only resembles a Daisy flower (an "Ox-Eye" daisy) it's also a wearable pin! Now how cool is that?
DP3 was Mike Snyder's IPP25 exchange puzzle and the materials used are White Ash for the petals, Red Oak for the back with pin attached and front center button is an unidentified Yellow Wood. The DP3 measures approximately 7.8cm in diameter.
The puzzle comes assembled and the goal is the remove the magnetic back, scramble the petals and rearrange the 17 petals back around the circular back and pin it onto your clothes. But the moment you remove the magnet back, all the petals will fall out. However, in order to assist with the re-packing, Mike has also provided a jig to hole the magnetic back while you try to re-arrange the petals.
The DP3 indeed looks like a wooden version of the real flower with great detailing, especially the petals. No wonder the fabrication of the puzzle required over 800 man hours and took 6 people to do it. The petals are laser cut and engraved with their identification numerals. Very well made and although the petals may look fragile at first sight, they are actually pretty thick and sturdy. Going by the numbers, here are the stats:-
1. 137 Puzzles made (so I believe Mike may still have some copies left if anyone is interested)
2. 6,302 pieces in total
3. 3,425 glue joints
4.2,466 carved pieces
To pack the 17 petals back into their original state is needless to say very difficult. There appears to be only one way to put back the petals in their original position but the petals can still be packed together in alternate ways although the fit and edge-to-edge line-up of the petals would not be perfect. Not to worry, all the necessary instructions and solution number pattern come with the puzzle.
Beautiful and nature inspired. The DP3 is definitely one of the nicest and more unusual exchange puzzles around for IPP35...and something you can wear too! If anyone is keen, please PM me for Mike's contact.
DP3 was Mike Snyder's IPP25 exchange puzzle and the materials used are White Ash for the petals, Red Oak for the back with pin attached and front center button is an unidentified Yellow Wood. The DP3 measures approximately 7.8cm in diameter.
The puzzle comes assembled and the goal is the remove the magnetic back, scramble the petals and rearrange the 17 petals back around the circular back and pin it onto your clothes. But the moment you remove the magnet back, all the petals will fall out. However, in order to assist with the re-packing, Mike has also provided a jig to hole the magnetic back while you try to re-arrange the petals.
The DP3 indeed looks like a wooden version of the real flower with great detailing, especially the petals. No wonder the fabrication of the puzzle required over 800 man hours and took 6 people to do it. The petals are laser cut and engraved with their identification numerals. Very well made and although the petals may look fragile at first sight, they are actually pretty thick and sturdy. Going by the numbers, here are the stats:-
1. 137 Puzzles made (so I believe Mike may still have some copies left if anyone is interested)
2. 6,302 pieces in total
3. 3,425 glue joints
4.2,466 carved pieces
To pack the 17 petals back into their original state is needless to say very difficult. There appears to be only one way to put back the petals in their original position but the petals can still be packed together in alternate ways although the fit and edge-to-edge line-up of the petals would not be perfect. Not to worry, all the necessary instructions and solution number pattern come with the puzzle.
Beautiful and nature inspired. The DP3 is definitely one of the nicest and more unusual exchange puzzles around for IPP35...and something you can wear too! If anyone is keen, please PM me for Mike's contact.
Tuesday, 28 June 2016
Maker Faire 2016
Last Sunday I spent a nice afternoon at Maker Faire 2016 which was held on the grounds of the Singapore University Of Technology & Design. I was invited by David Ang of Cubewerkz to share his table to showcase some of my own puzzle designs. In preparation for this event, I had produced a number of copies each of five of my 2D packing puzzle designs plus one from Rex Rossano Perez. I also added two other designs I had produced from last year; Goh Pit Khiam's Triple Play (my exchange puzzle for IPP34) as well as my SG50 puzzle.
The table David had was rather small and he had piles of twisties for sale, including a number of scientific and educational toys as well. But I was extremely fortunate that the table next to ours was vacant; the vendor/maker who rented it had decided not to show up, so I gamely shifted my puzzles over and created more breathing space for both David and myself.
The fair started at 10am in the morning and ended at 6pm in the evening. However, I had sold out all of my puzzles by around 4:30pm in the afternoon and had to "close shop" for the day. It was a very interesting day as I interacted with the folks who visited my table and tried their hand at puzzling. For many it was the first time they had come across mechanical puzzles, let alone 2D packing puzzles.
Surprising (or perhaps not so surprisingly, the majority of people that visited my table and played with the puzzles were kids and youths, some as young as 4 years old. Many of the children were probably fascinated with the colourful pieces I had purposely created along the animals theme. Without doubt my Jurassic Pack was one of the most popular, a 4 piece packing puzzle with a dinosaur theme. Some kids stood in front of my table for over an hour tirelessly trying to figure out the solutions. In terms of adult puzzlers, there were very few, less than ten or so who showed any keen interest, including a 67 year old grandma who was rather intrigued by my 4 Ducks & A Duckling. Most of the adults who were there were there just to pay for my puzzles for their kids! Now I am now wondering if there is a kid's market out there for puzzles in Singapore? Something I will definitely look into.
I am currently producing more copies of the above puzzles to fulfill some back-orders I received at the fair. If anyone is interested to buy any of the above, please PM me.
 |
| Clockwise from top right corner - Turtles, 4 Ducks & A Duckling (my IPP35 Exchange Puzzle), Digi-Hex, Jurassic Pack, No Pushing (by Rex Rossano Perez) and Double Happiness |
 |
| From Left - Goh Pit Khiam's Triple Play and SG50 |
The table David had was rather small and he had piles of twisties for sale, including a number of scientific and educational toys as well. But I was extremely fortunate that the table next to ours was vacant; the vendor/maker who rented it had decided not to show up, so I gamely shifted my puzzles over and created more breathing space for both David and myself.
The fair started at 10am in the morning and ended at 6pm in the evening. However, I had sold out all of my puzzles by around 4:30pm in the afternoon and had to "close shop" for the day. It was a very interesting day as I interacted with the folks who visited my table and tried their hand at puzzling. For many it was the first time they had come across mechanical puzzles, let alone 2D packing puzzles.
Surprising (or perhaps not so surprisingly, the majority of people that visited my table and played with the puzzles were kids and youths, some as young as 4 years old. Many of the children were probably fascinated with the colourful pieces I had purposely created along the animals theme. Without doubt my Jurassic Pack was one of the most popular, a 4 piece packing puzzle with a dinosaur theme. Some kids stood in front of my table for over an hour tirelessly trying to figure out the solutions. In terms of adult puzzlers, there were very few, less than ten or so who showed any keen interest, including a 67 year old grandma who was rather intrigued by my 4 Ducks & A Duckling. Most of the adults who were there were there just to pay for my puzzles for their kids! Now I am now wondering if there is a kid's market out there for puzzles in Singapore? Something I will definitely look into.
I am currently producing more copies of the above puzzles to fulfill some back-orders I received at the fair. If anyone is interested to buy any of the above, please PM me.
Wednesday, 15 June 2016
Heat Wave
As I was trawling through my box of IPP35 Exchange Puzzles (hoping to find something interesting and not too difficult to play with), I came across Yee Dian Lee's puzzle called Heat Wave.
Heat Wave is one of many 2D packing puzzle designs from Goh Pit Khiam. Goh has designed a number of 2D and 3D packing puzzles including some award winning ones such as the IPP33 Puzzlers' Award Dancing Shoes as well as two Honourable Jury Mentions during IPP35 for his Road Blocks and Number Blocks. Very prolific indeed!
Prior to receiving Yee Dian Lee's puzzle, I had already obtained Goh's Heat Wave design a couple of years earlier and with his permission had laser cut a prototype copy for myself based on an even earlier prototype wooden laser cut copy made by Walter Hoppe for Goh. In keeping with the name of the puzzle, I chose bright yellow and red acrylic for my copy!
Goh's original version has 5 pieces which has to be fitted into the tray that has a covering on the top with a square hole that the pieces have to go through. Lee's exchange version is the same design, except that his has an additional small square 6th piece and Lee's top covering has dimensionally smaller square hole than the original design. Lee's version also has a transparent cover to better let you see how the pieces form up inside the tray.
Heat wave is not an easy puzzle at all and I needed Goh's help to solve his version back then. Hmm...maybe things may have been less frustrating if I had used a clear cover instead. Lets just say its not your typical packing puzzle (those who have played with Goh's puzzles would know what I mean) and a number of "unusual" moves are required to fit all 5 pieces into the tray underneath the cover. Can't say more without any spoilers.
With a transparent cover, I feel Lee's version is a tad easier since you can see your progress or mistakes as you move along. Although it's actually meant to be harder than the original. But to be fair, I had played with the prototype previously. A newcomer may find it very challenging indeed. And as Heat Wave was one of my earlier packing puzzles from Goh, it did give me the experience necessary to later solve his other packing puzzles such as Retrofit and Fusion.
A great (and difficult) packing puzzle, unfortunately none commercially available except Lee may have some spare copies left over from his Exchange.
 |
| My prototype on the left and Yee Dian Lee's Exchange Puzzle on the right |
Heat Wave is one of many 2D packing puzzle designs from Goh Pit Khiam. Goh has designed a number of 2D and 3D packing puzzles including some award winning ones such as the IPP33 Puzzlers' Award Dancing Shoes as well as two Honourable Jury Mentions during IPP35 for his Road Blocks and Number Blocks. Very prolific indeed!
Prior to receiving Yee Dian Lee's puzzle, I had already obtained Goh's Heat Wave design a couple of years earlier and with his permission had laser cut a prototype copy for myself based on an even earlier prototype wooden laser cut copy made by Walter Hoppe for Goh. In keeping with the name of the puzzle, I chose bright yellow and red acrylic for my copy!
Goh's original version has 5 pieces which has to be fitted into the tray that has a covering on the top with a square hole that the pieces have to go through. Lee's exchange version is the same design, except that his has an additional small square 6th piece and Lee's top covering has dimensionally smaller square hole than the original design. Lee's version also has a transparent cover to better let you see how the pieces form up inside the tray.
 |
| Beautifully laser cut and great attention to detail with the pieces each having their own slots at the back |
Heat wave is not an easy puzzle at all and I needed Goh's help to solve his version back then. Hmm...maybe things may have been less frustrating if I had used a clear cover instead. Lets just say its not your typical packing puzzle (those who have played with Goh's puzzles would know what I mean) and a number of "unusual" moves are required to fit all 5 pieces into the tray underneath the cover. Can't say more without any spoilers.
With a transparent cover, I feel Lee's version is a tad easier since you can see your progress or mistakes as you move along. Although it's actually meant to be harder than the original. But to be fair, I had played with the prototype previously. A newcomer may find it very challenging indeed. And as Heat Wave was one of my earlier packing puzzles from Goh, it did give me the experience necessary to later solve his other packing puzzles such as Retrofit and Fusion.
A great (and difficult) packing puzzle, unfortunately none commercially available except Lee may have some spare copies left over from his Exchange.
Tuesday, 10 May 2016
Almost There....Balancing The Egg!
Played with two puzzles this evening. Had success with one but not the other.
The first puzzle (which I managed to solve without help) was Larry Siedman's IPP35 Exchange Puzzle called "Almost There", designed by Goh Pit Khiam.
This is a 2D packing puzzle entirely made from laser cut wood with 5 pieces consisting of 2 different identical shapes. Good quality manufacture here. Object is to fit all 5 pieces flush inside the tray.
Having played with several of Goh's packing puzzles and knowing his "signature style" of design, it didn't take me too long to solve. Please PM me if you want to the solution. The less initiated will find it pretty difficulty I guess. Challenging and tricky but not as hard as for example Fusion.
The second puzzle which I failed miserably at and no clue at all how to solve is Stephen Chin's "Ze Balancing Egg", his IPP35 Exchange Puzzle. Crafted out of what appears to be Mahogany, this is a beautifully made wooden turned egg, the size of a typical real egg. It even comes with it own decorative stand. Goal here is to balance the egg upright on its own (not on the stand).
I can hear a weight (possibly a ball bearing or similar) rolling around within the internal confines of the egg and I know the weight needs to be right at the bottom of the egg to get it standing upright...It's a dexterity puzzle of some sort probably but I just have no idea how to execute the necessary moves. A couple of times I thought I got it...but no! I am writing to Stephen for a clue, but he takes a while to reply. So if any of my readers can help me, please feel free to drop me a note. Any assistance will be much appreciated.
The first puzzle (which I managed to solve without help) was Larry Siedman's IPP35 Exchange Puzzle called "Almost There", designed by Goh Pit Khiam.
This is a 2D packing puzzle entirely made from laser cut wood with 5 pieces consisting of 2 different identical shapes. Good quality manufacture here. Object is to fit all 5 pieces flush inside the tray.
Having played with several of Goh's packing puzzles and knowing his "signature style" of design, it didn't take me too long to solve. Please PM me if you want to the solution. The less initiated will find it pretty difficulty I guess. Challenging and tricky but not as hard as for example Fusion.
The second puzzle which I failed miserably at and no clue at all how to solve is Stephen Chin's "Ze Balancing Egg", his IPP35 Exchange Puzzle. Crafted out of what appears to be Mahogany, this is a beautifully made wooden turned egg, the size of a typical real egg. It even comes with it own decorative stand. Goal here is to balance the egg upright on its own (not on the stand).
I can hear a weight (possibly a ball bearing or similar) rolling around within the internal confines of the egg and I know the weight needs to be right at the bottom of the egg to get it standing upright...It's a dexterity puzzle of some sort probably but I just have no idea how to execute the necessary moves. A couple of times I thought I got it...but no! I am writing to Stephen for a clue, but he takes a while to reply. So if any of my readers can help me, please feel free to drop me a note. Any assistance will be much appreciated.
Friday, 29 April 2016
Checkbox
Name
Checkbox
Designer
Designed in 2011 by Goh Pit Khiam
Manufacturer & Availability
Crafted by Brian Menold of Woodwonders. Sold for US$47 each but currently unavailable.
Type & Classification
2D Packing / Interlocking solid
Dimensions
7cm x 7cm x 2.2cm
Materials & Construction
The box is Granadillo while the pieces are East Indian Rosewood and Ash. Beautifully made (although the top surface of my box had a slight blemish, probably just my copy) and the pieces fit very nicely without being too snug.
Overview
Here is another packing puzzle from prolific designer Goh Pit Khiam. Like most 2D packing puzzles, this one came un-assembled. However unlike a traditional packing puzzle, the pieces of the Checkbox have various protrusions which mesh with each other and the box (which has got a channel running along the insides). Thus, Checkbox is also an interlocking puzzle as well. Goh had mentioned to me that he had originally designed a 9 piece version with numbers 1 to 9, but felt it was too difficult to solve.
The goal is to insert the pieces into the box AND form a checked pattern as shown in the photo. Right from the start, you can tell that orthogonal sliding of the pieces is required and no rotations are allowed. In fact no rotations are physically possible anyway.
Goh is famous for this sort of "look-simple-but-is-not" puzzles. It has just 4 pieces but I can assure you that it is very tricky to get the pieces into the box correctly to produce the final result. Some thinking is required to determine how the pieces interact with each other and vis-a-vis the box. A couple of times, I thought I had nailed it but the final piece going in either didn't form a checked pattern or couldn't fit.
Difficulty
I would rate it as moderately difficult but rather tricky to assemble. It takes approximately 11 moves to get all the pieces in and there is a sequence to that. But once you get it right, a nice a-ha feeling! Taking the pieces out is much easier, hence the puzzle is shipped un-assembled.
Checkbox
Designed in 2011 by Goh Pit Khiam
Crafted by Brian Menold of Woodwonders. Sold for US$47 each but currently unavailable.
2D Packing / Interlocking solid
Dimensions
7cm x 7cm x 2.2cm
Materials & Construction
The box is Granadillo while the pieces are East Indian Rosewood and Ash. Beautifully made (although the top surface of my box had a slight blemish, probably just my copy) and the pieces fit very nicely without being too snug.
Here is another packing puzzle from prolific designer Goh Pit Khiam. Like most 2D packing puzzles, this one came un-assembled. However unlike a traditional packing puzzle, the pieces of the Checkbox have various protrusions which mesh with each other and the box (which has got a channel running along the insides). Thus, Checkbox is also an interlocking puzzle as well. Goh had mentioned to me that he had originally designed a 9 piece version with numbers 1 to 9, but felt it was too difficult to solve.
The goal is to insert the pieces into the box AND form a checked pattern as shown in the photo. Right from the start, you can tell that orthogonal sliding of the pieces is required and no rotations are allowed. In fact no rotations are physically possible anyway.
Goh is famous for this sort of "look-simple-but-is-not" puzzles. It has just 4 pieces but I can assure you that it is very tricky to get the pieces into the box correctly to produce the final result. Some thinking is required to determine how the pieces interact with each other and vis-a-vis the box. A couple of times, I thought I had nailed it but the final piece going in either didn't form a checked pattern or couldn't fit.
Difficulty
I would rate it as moderately difficult but rather tricky to assemble. It takes approximately 11 moves to get all the pieces in and there is a sequence to that. But once you get it right, a nice a-ha feeling! Taking the pieces out is much easier, hence the puzzle is shipped un-assembled.
Summary
A very nice (and cute) well made little puzzle with a similar theme to Bill Cutler's Slide Block Sliding Block puzzle. If you like packing puzzles with an added twist, this is a must-have. Great fun and you won't tear your hair out trying to solve it.
Friday, 26 February 2016
Baffling Bolted Book
Name
Baffling Bolted Book ("BBB")
Designer
Louis Coolen & Adin Townsend
Manufacturer & Availability
Produced by Allard Walker (but all 3 gents had a hand in doing the modding and fittings with Louis doing most of the work!)
Type & Classification
Trick Opening/Take-Apart/2D Packing
Dimensions
18.2cm x 12cm x 3.8cm
Materials & Construction
The puzzle is actually a box which has been made to resemble a book and I believe the box is commercially available. Made of plywood with canvas wrapping. The 2D packing puzzle is laser cut acrylic.
Overview
This is one of the more unusual looking (and rather large in size) puzzles at the IPP34 Puzzle Exchange and it was fellow puzzle blogger Allard Walker's exchange puzzle. The BBB follows the theme of his previous year's (IPP33) exchange puzzle the Conjuring Conundrum where an available object (in the case of the BBB, a box-book) is fashioned and modified into a working mechanical puzzle.
Like the Conjuring Conundrum, the BBB offers two challenges. The first and easier (not easy) task is to open the box. The second is to use three pieces stuffed in a bag inside the box to make a line-symmetrical shape in a frame that is attached to the underside of the lid.
This is a sequential discovery puzzle where you are required to use whatever's in the puzzle (eg; tools etc) to solve it. No external implements or tools are allowed. To open the box requires approximate 7-8 steps. After about 3 steps, the lid opens partially and you get to have a bit of a glimpse of the inside. An a-ha moment! You can just about see a cloth bag and a card which holds the acrylic pieces for the second challenge but not more. From here, the difficulty increases. Not easy moving forward and it does require you to do some thinking how to use what's within the box to progress further. The next 4-5 steps if executed correctly will release the lid fully and bring you to the second challenge, forming a line-symmetrical shape inside the frame.
In case you are wondering what's a line symmetrical shape...simply put is this...if you draw a straight line over the shape you have formed with the three pieces and if the shape is the correct intended shape, you will get a mirror image on the left and right side of the line. Although its only three pieces, this 2D packing challenge is tough because you not only have to firstly form a symmetrical shape, but you need to form one that fits inside the parallelogram shaped frame. There are several symmetrical shapes to be found but only one which will fit inside the frame. Here is what makes the second challenge so very difficult, despite only having three pieces. Took me a while to figure this part out. I will not link the solution here but will provide it via email upon request.
Difficulty Level
Baffling Bolted Book ("BBB")
Louis Coolen & Adin Townsend
Produced by Allard Walker (but all 3 gents had a hand in doing the modding and fittings with Louis doing most of the work!)
Trick Opening/Take-Apart/2D Packing
Dimensions
18.2cm x 12cm x 3.8cm
Materials & Construction
The puzzle is actually a box which has been made to resemble a book and I believe the box is commercially available. Made of plywood with canvas wrapping. The 2D packing puzzle is laser cut acrylic.
This is one of the more unusual looking (and rather large in size) puzzles at the IPP34 Puzzle Exchange and it was fellow puzzle blogger Allard Walker's exchange puzzle. The BBB follows the theme of his previous year's (IPP33) exchange puzzle the Conjuring Conundrum where an available object (in the case of the BBB, a box-book) is fashioned and modified into a working mechanical puzzle.
Like the Conjuring Conundrum, the BBB offers two challenges. The first and easier (not easy) task is to open the box. The second is to use three pieces stuffed in a bag inside the box to make a line-symmetrical shape in a frame that is attached to the underside of the lid.
This is a sequential discovery puzzle where you are required to use whatever's in the puzzle (eg; tools etc) to solve it. No external implements or tools are allowed. To open the box requires approximate 7-8 steps. After about 3 steps, the lid opens partially and you get to have a bit of a glimpse of the inside. An a-ha moment! You can just about see a cloth bag and a card which holds the acrylic pieces for the second challenge but not more. From here, the difficulty increases. Not easy moving forward and it does require you to do some thinking how to use what's within the box to progress further. The next 4-5 steps if executed correctly will release the lid fully and bring you to the second challenge, forming a line-symmetrical shape inside the frame.
In case you are wondering what's a line symmetrical shape...simply put is this...if you draw a straight line over the shape you have formed with the three pieces and if the shape is the correct intended shape, you will get a mirror image on the left and right side of the line. Although its only three pieces, this 2D packing challenge is tough because you not only have to firstly form a symmetrical shape, but you need to form one that fits inside the parallelogram shaped frame. There are several symmetrical shapes to be found but only one which will fit inside the frame. Here is what makes the second challenge so very difficult, despite only having three pieces. Took me a while to figure this part out. I will not link the solution here but will provide it via email upon request.
Difficulty Level
For sequential discovery puzzle lovers, this is a pretty good one with some tricks here and there. Need to be careful or might miss some things. Not overly difficult but by no means easy either. For the 2D packing challenge, very difficult and can be a real pain! Not that many symmetrical type puzzles out there and this one is really a toughie.
Summary
A very nice, unusual and well executed exchange puzzle which provides two challenges in one puzzle. The BBB is available in limited quantities from puzzle purveyor Wil Strijbos. The 2D packing challenge is also available as a standalone puzzle (called the Symmple Puzzle; what an understatement! and designed by Adin Townsend) and available from Louis Coolen.
Subscribe to:
Posts (Atom)